The Motorized Cable Reeling Drums, offered by us are supports various cables reeling applications. Powered with springs and supported by automatic rewind feature, these reeling drums serves as simple source of power supply to machines like cranes and hoists. The reel drums, available with us will cover wide range of cable length & sizes.

These are available in three variations:

• Mono-spiral
• Standard lay
• Random lay

Owing to their design, these drums help in reducing tensions in the reeled cable substantially as against other form of drive. Other, fruitful features includes, improving upon the lining life and they also extend intervals between torque correction adjustments.

Orton make spring operated cable reeling drums are powered with springs and has an automatic rewind feature which provides an extremely simple way of supplying power to machines such as crane_s and hoists. These spring cable reeling drums are used for both ac and dc applications. These reels recovers and store the cable in multiple layerson the drum.

standard reels are supplied for the cable fed in the clockwise direction, when viewed from the slipring side. The same can be provided for anticlockwise feed of cable also. These reels are extremely simple to mount, and can be mounted on the structure with the help of a supporting flange - if no suitable structure is available, then a bracket can be connected to the flange and this can be fixed to the floor or tray etc.

the springs used in these reels are manufactured from the highest quality materials and are of clock spring type. A wide range of characteristics can be obtained by assembling these springs singly or in series or in parallel.

all the power sliprings are designed for 600v ac operating voltage.

spring operated cable reeling drums can also be supplied with geared rotary limit switch arrangement.

orton have a complete range of motor driven torque controller cable reeling drums. The reels shown in this catalogue are direct reeling units where the cable compartment is mounted directly on the torque controller. For those applications where the length and weight of the cable is in excess of the design capability of the direct reeling units, we have the indirect driven torque controller reels. With these reels the torque controller unit powers the reel compartment through a suitably selected transmission system. These types of cable reels are a reliable, low cost solution for reeling long lengths of cable. These drums are available for a complete range of cable lengths from 30 to 500 meters, for voltage up to 11000 v. These spring operaded cable reeling drums are easily installed, have an absolute minimum maintenance requirement and are virtually unaffected by extremes of temperature and environment. These types of spring cable reeling drums are available in 3 types viz monospiral, standard lay and random lay.

We are manufacturer and exporter of Cable Reeling Drums. ORTON make spring operated cable reeling drums are powered with springs and has an automatic rewind feature which provides an extremely simple way of supplying power to machines such as cranes and hoists. These spring cable reeling drums are used for both AC and DC applications. These reels recovers and store the cable in multiple layer son the drum.

These types of Cable Reeling Drums are used to avoid; tension on the cable. However, a drive mechanism is required to drive the cable reeling, which is not required in case of spring operated or motorised CRD's.

These types of cable reeling drums are recommended for single layer winding of cables.

Applications

Horizontal Recovery:
This arrangement can be used in two applications i.e., end and centre feed. In the end feed type, the drum is mounted on the moving machine and the reel recovers the cable laid on the ground. Here the machine travel is equal to the capacity of the reel. In the centre feed type, the machine travels on both sides of the fixed point, where a turnover anchor is installed. This arrangement provides travel equal to twice the capacity of the reel.

We offer qualitative and maintenance free range of Spring Operated Cable Reeling Drums. The spring-powered drums are suitable for both A.C and D.C. Applications and are modified by adding springs to the machines in order to attain the required tension & accommodate the total length of cables. These are simple to mount and can be mounted on the structure with the help of supporting flange.

Moreover, the springs used in these reels are contrived from the highest quality materials and are of clock sprin

With our rich industry experience, we are Manufacturer and Service Provider of a wide assortment of inventively designed Automation & Control Systems, Electro Robotech and Automation Products. The offered range is precisely manufactured using optimum quality raw material and innovative technology. These products are known for their distinguished features like perfect finish, sturdy design, accurate dimension and durability. Our esteemed clients can avail the offered product from us in various specifications from us at market leading prices.